1
		2							3
					4
	5
								6			7		8
9
					10										11
	12																13
14
									15
16			17				18
															19
									20

Across 3. on a fillet weld symbol, the vertical line is always on the _____ 5. process application method specified by the letters MA 7. the _______ view usually shows the part shape most clearly 9. the ______ of the fillet weld is always to the right of the weld symbol 10. length of intermittent welds 14. weld-all-around symbol 16. contour symbol indicating a flat face on the weld 18. _____ intermittent welds are not directly across from each other on opposite sides of the joint 20. surface finish method specified by the letter M

Down 1. when the symbol is above the reference line, a weld is required on the ________ side 2. _________ intermittent welds are directly across from each other on opposite sides of the joint 4. process application method specified by the letters ME 6. when the symbol is below the reference line, a weld is required on the ________ side 8. multiple 2D views of a part 11. a flag indicates a ______ weld 12. type of weld designated by a triangular weld symbol 13. surface finish method specified by the letter G 15. part added to the reference line for specification, process or other notes 17. the leg or weld ______ is always place to the left of the weld symbol 19. center to center spacing of intermittent welds